Cypress Semiconductor MiniProg3 Benutzerhandbuch - Seite 17

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Hauptplatine Cypress Semiconductor MiniProg3 herunter. Cypress Semiconductor MiniProg3 20 Seiten.

Seite drucken
3.1.5

Reference

For more information on the PSoC 3 and PSoC 5LP JTAG, SWD, and I
3 and PSoC 5LP Technical Reference
PSoC 1 Technical Reference
3.2

Connectors

3.2.1

5-Pin Connector

The 5-pin connector is configured as a single row with 100-mil pitch. It is designed to mate with a
Molex model 22-23-2051 (straight) or 22-05-3051 (right angle) male header with a key tab.
Figure 3-2. 5-Pin Connector with Pin Assignments
MiniProg3
(End View)
3.2.2
10-Pin Connector
The 10-pin connector is configured as a dual row with 50-mil pitch. It is used with a ribbon cable
(provided) to mate to a similar connector on the target board. The recommended mating connectors
are the Samtec FTSH-105-01-L-DV-K (surface mount) and the FTSH-105-01-L-D-K (through hole)
or similar connectors available from other vendors. The signal assignment is shown in
When programming JTAG devices, note that MiniProg3 does not support nTRST pins.
Figure 3-3. 10-Pin Connector with Pin Assignments
XRES
GND
GND
TDI
TDI
GND
GND
TDO
TDO
GND
GND
TCK
TCK
GND
GND
TMS
TMS
VTARG
VTARG
CY8CKIT-002 MiniProg3 User Guide, Doc. # 001-59350 Rev. *E
Manuals. For more information on PSoC 1 interfaces, see the
Manual.
SDAT
SCLK
XRES
GND
VTARG
Mating
Connector
Note The ribbon
cable connector
extends beyond the
body of the
connector. Be sure
to allow room.
Pin 1
Technical Description
2
C interfaces, see the
PSoC
Figure
3-3.
17