Asian Power devices WA-36A12S Einrichtung

Blättern Sie online oder laden Sie pdf Einrichtung für Adapter Asian Power devices WA-36A12S herunter. Asian Power devices WA-36A12S 4 Seiten.

Seite drucken

Installation

Hardware Installation

NOTES

• Make sure you have a personal computer with any open USB port before

connecting the drive to your computer.

• Power for all device should be turn off before attaching the cables.

Connecting to computer

Connect the drive to the computer as shown in figure.

Connect the USB cable to the External Writer.

Connect the other end of the USB cable to your computer.

Connect the AC adapter plug to the power connector at

the rear of the drive. Attach the AC adapter to the AC

wall outlet.

Make sure the power switch is turned on.

When the computer is ready, confirm that the drive is

detected.

And then, insert the supplied software CD into the

External Writer and install the software.

NOTES

• Please do not connect the AC adapter and USB cable by any means other than specified above.

• "Use only power supplies listed in the user instructions" or

"For applicable power supplies see user instructions" .

Adapter information

- Model name: WA-36A12S

- Manufacturer: Asian Power devices Inc.

- Rating: 36 W (3.0 A, 12 V)

• The appliance is not intended for use by young children or infirm persons without supervision.

Young children should be supervised to ensure that they do not play with appliance.

• If the appliance is supplied from a cord extension set or an electrical portable outlet device, the cord extension set on electrical portable outlet device must be

positioned so that it is not subject to splashing or ingress of moisture.

• Please pay attention to handling Electrostatic Sensitive Devices, you may use anti-static products such as wrist straps, heel straps, mats to protect your body

from electrostatic.

To AC wall outlet.

USB cable