AsiaPower IND600 Benutzerhandbuch

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für UPS AsiaPower IND600 herunter. AsiaPower IND600 2 Seiten.

Thank you for selecting ISO9001:2008 certified Uninterruptible power supply system (UPS). It provides perfect protection for your

computers. The Manual Provides you with step by step guidance to install & use UPS. It contains important safety instructions for

operation & correct installation of the UPS .In case you have any problem with the UPS please refer to this manual before calling

customer service.

PRESENTATION

The UPS is a Line interactive

uninterruptible power system (UPS).

When utility input is Normal, the UPS will

charge the internal battery. If the utility

input is abnormal, the UPS can supply AC

power to the load immediately without

resetting the computer.

The UPS:

1. Utilizes microprocessor based

controls, to get assurance of

reliability.

2. Automatic frequency selection to

match with utility power.

3. Advanced battery management to

prolong battery's life and fully charge

the battery.

4. Overload & short circuit protection

both in line and battery mode.

IND600 UPS is designed keeping in mind

severe Indian Conditions. It has below

unique features, which no ordinary UPS

provides.

INDIA SPECIFIC FEATURES OF UPS

1. AVR Input Range 140V - 300V.

2. 3 output sockets.

3. OFF mode battery charging.

KEEPING YOUR TECHNOLOGY ALIVE

IND600 User Manual

A. Inspect UPS

Remove the UPS from its package and

inspect it for damage that may have

occurred during shipping. If any damage

is found, re-pack the unit and return it to

the place of purchase.

B. Charging Battery

Charge battery for 16 hours for first time

run.

C. Install UPS

• Do not place UPS in Direct sunlight.

• Do not place UPS near Excessive heat

source

• Do not place UPS near Excessive

humidity or let UPS come in contact

with liquids.

Place the UPS atleast 20cms away from

the monitor to avoid interference.

D. Connect Computer to UPS

This UPS is equipped with 3 output

sockets. Data sensitive equipment such

as a computer, and monitor should be

Battery power is provided without

restart in case of power failure.

UPS

Note : Do Not Plug a laser printer, copier,

heaters, or other large electrical device

into the UPS. The power demands of

these devices will overload and possibly

damage the UPS.

E. Turn on / off UPS

Plug in the 3 pin power cord into 230V AC

wall socket. Press the power switch to

turn on the UPS; press the power switch

again to turn off the UPS. Do NOT press

the switch too hard for extended life of

the power switch.

F. User Interface

Front Panel:

The front panel incorporates one LED

and a switch. The

functions of these

are listed below:

LED Status:

1. AC Mode : Green

light steady.

2. Backup Mode : Green light blinking

Alarms:

1. Backup Mode : When in backup

mode, the green LED blinks and the

UPS Beeps every 2 seconds.

2. Battery low: Rapid beeping sound

every half second.

3. Overload : Continuous beeping

sound.