CyronMotor ABS1LW Benutzerhandbuch - Seite 7
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Beleuchtungsanlagen CyronMotor ABS1LW herunter. CyronMotor ABS1LW 8 Seiten. Auxiliary light
Seite druckenFigure 4
TROUBLESHOOTING:
Q. I am using the Basic Power Cable connected directly to headlight wire harness. Control
Option B. The Headlight flashes on and immediately goes off.
A. Headlight harness is not able to handle the extra power draw of ABS1. Try Control
Option A or C. If not possible use ABS1CRD multifunction cable or a traditional relay to
draw power from battery.
Q. Using Multifunction cable. ABS1H turns on but cannot switch ABS1L from white to
yellow.
A. Starting with the high beam off, turn on high beam in two quick bursts followed by a ~1.5
second on time.
Q. Does ABS1LW also switch from white to yellow?
A. No, it only illuminates white. However, using ABS1CRD you have the option of running
the light at half power by the same sequence of high beam bursts.
Q. I am not sure if my fog light wires are fused. Should I add an inline fuse?
A. Almost all the standard wire harnesses in automobiles and powersports are fused. When
in doubt you should add an inline fuse.
Q. I would like to have two ABS1 on my bike. And for symmetry I would like to have both on
at the same time, all the time. My goal is to improve my visibility of low beam. What are my
choices?
A. A pair of ABS1LW along with ABS1CRD is your best choice. Both lights will stay on with
low beam all the time.
7