BluePoint Fasteners BP-27C Gebrauchsanweisung - Seite 4
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Werkzeuge BluePoint Fasteners BP-27C herunter. BluePoint Fasteners BP-27C 13 Seiten.
SAFETY PRECAUTION
Tool operators and bystanders
must wear ear and eye protection.
Read the manual thoroughly before
operating the tool.
DAILY FUNCTION TEST
1.
Always check the tool first to
ensure that it does not contain a
strip or a fastener.
Never keep a hand over fastener
loading end of the tool. A serious
hand injury may occur from
penetration by the piston or a
discharged fastener.
2.
Try the tool by depressing the nose
piece, barrel and firing pin spring
completely on a hard surface. You
should hear an audible clicking
sound. Let up on the tool and make
sure the barrel is open to
semi-open position.
06
SAFE HANDLING OF TOOLS
BP-27C IS NOT A STAND-ALONE TOOL.
IT MUST ALWAYS BE USED MOUNTED ON A BLUE POINT POLE.
1.
Always make sure that the tool is
working
properly
before
use.
Follow the Daily Function Test.
2.
Always use certified BLUE POINT
loads from a box indicating the
type of load, power and number.
Never attempt to use unknown
power loads.
3.
DO NOT carry loads in pockets
with loose pins or other objects.
Doing so may cause the load to fire.
4.
DO NOT load a tool unless you
intend to use it immediately.
Unattended loaded tool in the
workplace
may
result
in
its
accidental discharge by others.
5.
Never place your hands or any
other body part on the loading
end of the tool. It can cause serious
injury by the fastener or piston if
the tool is fired accidently.
6.
Always unload the tool and store
it along with the loads safely
locked in a
toolbox.
Keep the keys
away
from
children
unauthorized persons.
7.
Never point the tool at yourself or
others.
8.
Never carry a loaded tool around
or play with the tool.
9.
Never allow untrained persons to
operate the tool.
10. Using
or
cleaning
tools,
handling loads in poorly ventilated
areas may result in exposure to
lead and other substances known
to cause birth defects and physical
changes. Always ensure adequate
ventilation at all times and wash
thoroughly after exposure.
07
and
or