Ega Master 62982 Betriebsanleitung - Seite 6
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Elektrowerkzeug Ega Master 62982 herunter. Ega Master 62982 10 Seiten. Analogic reversible mini torque wrench
Seite drucken
1. Insert an appropiate socket or drive attachment onto the square drive of the ratchet and onto
the fastener you want to tighten.
2. Apply hand pressure to the grip, and ONLY TO THEGRIP. You may support the wrench at
the ratchet head with the other hand to steady ir, especially when using long socket extensions,
without appeciably affecting the accuravy of the wrench.
3. If, due to the required effort, you need to use both hands, put the other hand on the top of the
first hand, never on any other part of the wrench.
4. Apply slow and steady pull or push until the wrench momentarily releases, wit or without a
distinct "click" sound. Release the pressure right at this point. DO NOT OVERTORQUE!
Overtorqued or defective fasteners, sockets, as well as the wrench itself, may suddenly break
causing you to lose balance, fall, or to suffer other trauma. Be sure that you have firm footing,
are properly balanced, ad if necessary are using appropiate harness, back support, or other safety
device.
1. When not in use, adjust the wrench to its lowest reading, and store it in the provided case.
2. With the exception of the ratchet mechanism, do not lubricate the wrench. The ratchet
mechanism may be lubricated as needed with a few drops of light machine oil.
3. Do not use acetone or the other solvents to clean the wrench, use window cleaner or
denatured alcohol applied with a clean cloth instead.
4. With the excepcion of the ratchet mechanism, there are no user-serviceable parts. Do not
disassemble the torque wrench for any reason. When service is needed, send the wrench to the
nearest factory-autorized service center.
This torque wrench is certified to have been calibrated prior to shipment to the accuracy of +/-
4% in the clockwise direction.
6
APPLYING TORQUE
SAFETY WARNING
MAITENANCE
CERTIFICATION