Blueridge BM12MCC Installationshandbuch - Seite 16
Blättern Sie online oder laden Sie pdf Installationshandbuch für Fan Blueridge BM12MCC herunter. Blueridge BM12MCC 18 Seiten. Ceiling cassette indoor air handler
Seite drucken
Electrical Wiring
CAUTION
•
All field wiring and components must be installed by a licensed electrician and must comply with
relevant European and national regulations.
•
Use copper wire only.
•
Follow the 'Wiring diagram' attached to the unit body to wire the outdoor unit, indoor units and
the remote controller.
•
A circuit breaker capable of shutting down power supply to the entire system must be installed.
•
Note that the operation will restart automatically if the main power supply is turned off and then
turned back on again.
•
Be sure to ground the air conditioner.
•
DO NOT connect the ground wire to gas pipes, water pipes, lightning rods, or telephone ground
wires.
•
Gas pipes: might cause explosions or fire if gas leaks.
•
Water pipes: no grounding effect if hard vinyl piping is used.
•
Telephone ground wires or lightning rods: might cause abnormally high electric potential in the
ground during lightning storms.
How to connect wiring
•
Remove the control box lid of the
indoor unit.
•
Remove the cover of the outdoor unit.
•
Follow the "Wiring diagram label"
attached to the indoor unit's control
box lid to wire the outdoor unit, indoor
unit and the remote control. Securely
fix the wires with a field supplied
champ.
•
Attach the cover of the outdoor unit.
Model
Phase
12K~18K
1Phase
Page 16
Power
Frequency
Circuit breaker/
and volt
Fuse(A)
208-240V
20/16
3
4
5
6
7
7
1
2
1 Control box lid
2 Wiring diagram label
3 Power supply terminal block
4 Clamp for wiring
5 Wiring between units
6 Plastic cover
7 Clamp (field supply)
Fig 7.1
Revised 5/14/2020