Asko D1996HNDL Handbuch für Planung und Design - Seite 9

Blättern Sie online oder laden Sie pdf Handbuch für Planung und Design für Geschirrspüler Asko D1996HNDL herunter. Asko D1996HNDL 15 Seiten. Standard dishwashers
Auch für Asko D1996HNDL: Handbuch für Gebrauch und Pflege (12 seiten), Installation und Anpassung (4 seiten), Handbuch für Planung und Design (19 seiten), Handbuch für Gebrauch und Pflege (12 seiten)

D1796FI AND D1996FI CUSTOM PANEL INSTALLATION OPTIONS

4-INCH TOE KICK INSTALLATIONS
Custom panels the same height as the
dishwasher door
If the custom panel is the same height as the dishwasher door, a 2"
decorative fill strip or pull-out cutting board must be used to fill the
area between the panel and the counter top (as illustrated below).
2" decorative fill strip or cutting board
597 mm
4-inch toe kick
Custom panels that extend to cabinet top
Another installation option for a 4" toe kick is to extend the
custom panel to the cabinet top (as illustrated below), which
eliminates the need for a decorative fill strip. A one-piece custom
door panel with a curved handle is available for 4-inch toe kick
installations (see page 12).
Panel extends from toe kick to cabinet top.
23-1/2"
597 mm
4-inch toe kick
NOTE: If the cutout is 24" wide, the custom panel can be
23-3/4" wide.
Specifications are subject to change without notice. See installation instructions for additional details.
23-1/2"
ASKO D
With a 4-inch toe kick installation, the
door panel extends 2 inches above the
control panel, as illustrated.
If you install the door panel to reach the cabinet top, we
recommend that you install a 2" support strip between the upper
edge of the dishwasher and the counter to hide the top of the
dishwasher and further reduce water noise. A metal fill strip is
also available for this type of installation (see page 12).
2-inch support strip
4-inch toe kick
6-INCH TOE KICK INSTALLATIONS
For 6" toe kick installations, no decorative fill strips or support
strips are necessary.
Panel extends from toe kick to cabinet top.
ISHWASHER
1-3/4"
(44 mm)
9