Bluerock Tools TYP-75 Betriebshandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Bohrer Bluerock Tools TYP-75 herunter. Bluerock Tools TYP-75 19 Seiten. Magnetic drilling machine

Seite drucken

T Y P - 7 5

M A G

D R I L L

Ø DO allow machine to reach operating speed before starting a hole.

Ø DO unplug machine while changing or adjusting cutting bits so as not to accidentally turn

machine on.

Ø DO remove adjusting keys or hex wrenches prior to turning the machine on.

Ø DO use cutting paste (instead of cutting oil) when using this drill in an inverted position to

prevent oils from entering the electrical system and for ease of cutting.

Ø DO tie a loop in any extension cord connections to prevent cords coming apart and a loss of

power.

Ø DO guard against electric shock by preventing body contact with grounded surfaces such as

pipes, radiators, ranges, refrigerators, etc.

Ø DO be mindful that power tools can expose an operator to vibrations transmitted trough

contact with the machine. Prolonged exposure can lead to medical issues which should be

discussed with a medical professional.

Ø DO tie in a drip loop in the power cord to prevent cutting fluid from running into the power

receptacle.

Ø DO use a dust extraction system for cutting materials that create dust such as cast iron. The

operator should also wear a protective respiratory device.

Ø DO NOT make adjustments to machine while the machine is running.

Ø DO NOT switch off the machine when it is under load, except in an emergency.

Ø DO NOT remove or modify grounding plug. Only to be used on a properly grounded circuit.

Ø DO NOT leave the machine running when not in use.

Ø DO NOT hold the work piece by hand or using body. Always mechanically clamp or secure

work piece.

Ø DO NOT allow coolant oil to enter the machine's ventilation system.

Ø DO NOT operate machine outside of machine specifications.

Ø DO NOT touch moving parts while the machine is running as death or dismemberment could

occur.

Ø DO NOT remove machine metals panels while machine is connected to a power source. Only

to be removed for service by qualified personal and put back on the machine after service is

complete.

Ø DO NOT allow children or untrained personal to operate machine.

Ø DO NOT use this machine in the rain or a wet environment. If using outdoors, make sure the

adhering surface is clean and dry.

Ø DO NOT operate in the presence of explosive materials as power tools create sparks which

may ignite dust or fumes.

Ø DO NOT drill into an area that may contain a live electrical wire/circuit.