Asko D5132XXL Installationsanleitung Handbuch - Seite 5

Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Geschirrspüler Asko D5132XXL herunter. Asko D5132XXL 16 Seiten. Xxl dishwasher

Seite drucken

CUSTOM DOOR PANEL DIMENSIONS

FITTING THE D5232XXLFI, D5233XXLFI, D5251XXFI, D5253XXLFI, D5531XXLFI,

D5731XXLFI, D5833XXLFI ASKO-MADe Or cuStOM DOOr pAneL - 4 Inch tOe KIcK.

The D5232XXLFI, D5233XXLFI, D5251XXFI, D5253XXLFI,

D5531XXLFI, D5731XXLFI and D5833XXLFI can be

installed with a fully integrated, buyer supplied custom

door panel or ASKO accessory panel that extends from the

toe kick to the counter top. The unit comes with everything

needed to make installing the door panel easy. The door

is predrilled for the panel's mounting screws.

The custom panel should be a minimum of 3/4" (19mm)

thick.

Items provided with the unit

Two 3/8" screws (B) for temporarily hanging the

panel.

Six 1-3/4" screws (D) for mounting the custom

wooden panel to the dishwasher.

INSTALLING THE CUSTOM PANEL OR

ASKO AcceSSOrY pAneL - 4 Inch tOe

KICK

A custom door panel should be installed before the unit

is mounted to the cabinet.

Refer to the illustration at the right for

instruction references.

1. Fit the handle (A) onto the panel according

to the manufacturer's instructions. (NOTE: A

handle should be used rather than a knob,

because a knob does not provide enough

grip.)

IMPORTANT! The custom panel must not obstruct the

fan exhaust vent; otherwise, moisture from the vent

could eventually damage the cabinet and create drying

problems.

2. The two short screws (B) go into the back of the panel

15-7/16" (392 mm) from the upper edge of the panel and

10-7/8" (266 mm) from the center of the panel. Insert the

short screws into the panel, leaving 1/8" (3 mm) of space

between the screw head and the panel.

3. Hook the panel screws (B) into the keyholes (C) on the

dishwasher door.

4. Slide the panel to the left until it is centered in the

opening and secure the screws.

5. Open the door and use the six screws (D) supplied to

secure the panel to the door.

NOTE:

If the door panel weighs more than 15 pounds, you

may need to order the heavy-duty door springs.

*Max panel width cannot exceed cutout dimensions less

1/8" (2.5mm) reveal on each side.

Custom Panel Dimensions

Width

Height

Weight:

Thickness:

ADJUSTING THE DOOR SPRINGS

Before you push the dishwasher into the cabinet opening,

test the door to make sure it stays in place at any angle. If

it tends to fall down, pull out the machine and adjust the

tension of the door springs on the sides of the machine

by moving them one hole farther back or by twisting the

spring to make it shorter.

Customer Care Center

1-800-898-1879

www.askousa.com

23-1/2" (597mm)*

29-7/8"

(760

Measured from the

mm)

top of the panel to

lower edge of the

kitchen cabinet.

Up to 15 lbs.Up

to 20 lbs. with ac-

cessory spring.

3/4" (19mm)

Shorten

Page 5