egepack e one 45571 60503 Handbuch - Seite 11

Blättern Sie online oder laden Sie pdf Handbuch für Spender egepack e one 45571 60503 herunter. egepack e one 45571 60503 17 Seiten. Sensor-dispenser

Seite drucken

USE

The dispenser must be mounted to the wall

using the supplied mounting kit.

Use the supplied key to unlock and

open the lid

Open the batteries-housing (A) and

insert 4 D batteries

place the roll with bar on the supports

Unroll a portion of paper and Place the paper

between the two rolls and close the

dispenser. The paper will come out auto-

matically closing the dispenser. If the

dispenser doesn't works, open it and check

the correct positioning of paper or the

correct positioning of the batteries.

ATTENTION!!! for a correct use, check that

the rolls is fitted in the same direction as

shown on the label placed on the dispenser's

base.

(A)

(B)

(A)

BEDIENFELD

S M L

ZEITVERZÖGERUNG

TIME DELAY

SENSO R

PA PER

S =

M =

S M L

L =

Time Delay

Sensor

Paper

S = 200 mm

M = 270 mm

L = 340 mm

Set the dispensing settings using the

apposite panel inside the dispenser :

S M L

SENSOR

PAPIER

Set the stop interval by moving the small

lever in correspondence with:

0 Sek.

2 Sek.

4 Sek.

Set the sensitivity level of the sensor:

kurz

mittel

lang

Set the length of the dispensed paper

portion by moving the small lever

as following:

The paper will come out automatically

closing the dispenser.