BlueSky Mast AL2 STANDARD Series Schnellreferenzblatt - Seite 5

Blättern Sie online oder laden Sie pdf Schnellreferenzblatt für Hebesysteme BlueSky Mast AL2 STANDARD Series herunter. BlueSky Mast AL2 STANDARD Series 6 Seiten.

Seite drucken
BlueSky Mast AL2 STANDARD Series Schnellreferenzblatt
1
Remove the stakes from the Lift
Base Plate by using the stake
remover.
6
Raise the lift base plate until it
nests firmly into the next mast
pole.
10
Repeat this process until the
blue secondary guy ring is
within reach.
15
Continue lowering the mast until
the primary guy ring is within
reach.
Do Not Duplicate, Alter, or Copy without the Express Written Consent
of BlueSky Mast, Inc. Copyright 2015 BlueSky Mast, Inc. All Rights Reserved
Quick Reference Sheet - Primary and Secondary Guying
LOWERING / RECOVERY
2
Unlock the ALL guy ropes and
slide the guy handles toward
the guy stakes 12 inches.
7
Release the cam lock and
SLOWLY lower the mast to the
ground. Remove the mast pole.
11
WARNING: If at any point the
mast begins to slip while the
cam lock is locked - STOP
16
Remove the 4 primary guy
ropes and unpin the primary
guy ring.
AL2 Lift Series
3
Release the cam lock.
8
Raise the lift base plate until it
nests firmly into the next mast
pole.
12
Use the 7/16 wrench provided
with the system to make adjust-
ments to the cam lock.
17
Pull the slack in from all primary
and secondary guy ropes, wind
them up and stow them.
Read Manual Before Use
Refer to detailed instructions in the
AL2 Lift Series Manual at all times
4
Raise the mast up enough to
remove the 1st mast pole .
9
Adjust all 4 PRIMARY Guy Ropes so the mast is straight and perpen-
dicular. You should only have to adjust the primary guy ropes for the
first 3 - 4 center mast poles, unless you are experiencing high winds.
13
Tighten the nut on the cam lock
a quarter turn until slipping no
longer occurs.
18
Remove and stow all guy
stakes.
5
Lock the cam lock and lower
the lift base plate and remove
the 1st mast pole.
14
Remove the 4 secondary guy
ropes and release the cam lock
on the secondary guy ring.
19
Remove and stow the primary
and secondary guy rings