AMBIE AM-BT01 Einführung Handbuch - Seite 3

Blättern Sie online oder laden Sie pdf Einführung Handbuch für Kopfhörer AMBIE AM-BT01 herunter. AMBIE AM-BT01 6 Seiten.

reconnection attempts. When this happens, you can use any key to force the

accessory to try reconnecting, or you can use NFC to reconnect the two devices.

To force the headset to try reconnecting

Android™ device: Make sure that the Bluetooth® function is turned on.

Press any key on the headset.

To reconnect your headset using NFC

Android™ device: Make sure that the NFC function is turned on and that the

screen is active and unlocked.

Place the Android™ device over your headset so that the NFC detection area

of each device touches the other.

R estarting and resetting the headset

You can force your headset to shut down in situations where it stops responding or

won't restart normally. No information about paired devices gets deleted. You can

also reset your headset to its original factory settings, which deletes all information

about paired devices.

To force the headset to shut down

•

Press and hold down the power key for at least 6 seconds.

To reset the headset

Turn oﬀ the headset, then connect the charger so that the headset starts to

charge.

Press and hold down

Wearing instruction

To get the best performance from your headset when using it outdoors, it is

recommended that you carry the device that you have paired with the headset on the

same side of your body as the antenna of the headset unit.

until the headset vibrates brieﬂy.