Ambient NanoLockit Handbuch - Seite 9

Blättern Sie online oder laden Sie pdf Handbuch für Aufnahmegeräte Ambient NanoLockit herunter. Ambient NanoLockit 19 Seiten. Timecode + logging
Auch für Ambient NanoLockit: Schnellstart-Handbuch (2 seiten), Schnellstart-Handbuch (2 seiten), Kurzanleitung für die Inbetriebnahme (20 seiten), Schnellstart-Handbuch (5 seiten), Handbuch (4 seiten), Anleitung (5 seiten), Kurzanleitung (2 seiten)

5.2 C-Jam Mode (Continuous Jam)

The C-Jam Transmitter can either be a Lockit, LockitSlate or Lockit+.

In C-Jam Mode we utilize our ACN network to completely prevent any drift. In

this mode one Lockit device acts as a C-Jam Master. It sends a pulse through

the ACN every six seconds to constantly align with all other Lockit boxes.

To start the unit as C-Jam Master press and hold

Green

Press and hold

The icon on the display will switch to M.

All other Lockits (that are on the same ACN channel) will now automatically

follow the C-Jam Master and display an ACN icon at the lower right of the

display.

Since even in C-Jam Mode every unit still uses its own VCO (voltage-controlled

oscillator) to generate timecode (and sync), they don't necessarily have to be

in range of the C-Jam master constantly to be accurate.

Lockit devices that are powered up at a later point in time will automatically

follow the C-Jam Master and set their timecode and frame rate accordingly.

Note: Just one unit is allowed to be the C-Jam Master within an ACN channel. A

second master will be blocked and will also automatically follow the C-Jam Master

and display an ACN icon at the lower right of the display.

On the display you will see an (M)

appear, indicating that the device

is ready to go.

to confirm the timecode and start the C-Jam.

Green, then tap

Power.

Lockit Users manual |