ACR Electronics RCL-50B Handbuch zur Produktunterstützung - Seite 16

Blättern Sie online oder laden Sie pdf Handbuch zur Produktunterstützung für Flutlicht ACR Electronics RCL-50B herunter. ACR Electronics RCL-50B 19 Seiten. Remote control searchlight master controller point pad

Seite drucken
8.0

BULB REPLACEMENT

A quartz-halogen bulb is provided with your RCL-50B. If the bulb should need replacement, it
must be ordered through ACR Electronics, by P/N A1-14-0090-1 (12V units) or A1-14-0090-2
(24V units).
To replace the lamps:
1.
Disconnect unit from power source and allow bulb to cool.
2.
Remove three screws holding the front flange and glass in place.
3.
To remove the old lamp bulb, grasp base of the lamp and pull straight out. DO NOT
TOUCH GLASS PARABOLIC REFLECTOR WITH FINGERS OR TOOLS!
4.
Install the new lamp bulb using a soft clean cloth to avoid touching the bulb with your
fingers. Insert the lamp bulb pins into socket and press firmly in place.
NOTE: If the Lamp Bulb or Reflector are accidentally touched, carefully clean with
a soft rag and alcohol before continuing.
5.
Replace the front flange and glass and install the three retaining screws. Be sure the
neoprene gasket is securely in place.
6.
Reconnect the unit to the power source.
9.0

RCL-50B SEARCHLIGHT COMPONENTS

PRODUCT NO. 1939.3 - RCL-50B 12 V Searchlight Installation Kit includes:
Description
Searchlight, RCL-50B, 12 V
Kit, Nylon Washers (4)
Connector, "F"
Cable, Coaxial
Master Controller, URC-102
Connector, "In-Line"
Point Pad™, URP-102 with
Surface Mount Case
Case, Flush Mount
Gasket, Surface Mount
Gasket, Flush Mount
U Clamp
Nuts, Nylon-lock
Washers
Warranty Card
Product Support Manual
Mounting Templates
Quantity
1
1
2
15'
1
8
1
1
1
1
2
2
2
1
1
1
14
ACR Part Number
A3-06-0092-3
A3-06-1940
A1-03-0220
A2-07-0002-6
A3-06-2231
A1-03-0222
A3-06-2230
A1-18-1875-2
A1-25-0140-1
A1-25-0140-2
A1-17-1366
A1-05-0776
A1-05-0777
A1-20-1019
Y1-03-0141
Y1-03-0138-1
Y1-03-0141 Rev. B