1010music Bitbox mk2 Schnellstart-Handbuch - Seite 3

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Probenehmer 1010music Bitbox mk2 herunter. 1010music Bitbox mk2 4 Seiten.

Seite drucken

SELECT A PAD MODE

Touch the Pad Mode button on the Waveform screen to choose one of the following:

Icon

Pad Mode

Sample

Multi-Sample Spread a list of wav files across the keyboard

Clip

Slicer

Granular

New Rec

New Multi

USE MIDI AND CV

INPUTS

Connect the bitbox mk2 to

Control Voltage and MIDI

sources to trigger pads,

modulate parameters, and play

pads chromatically.

RECORD A WAV FILE

1. Plug the audio source into the IN1 and IN2 jacks.

2. Touch a pad in the grid on the touchscreen to select it.

3. Press the INFO button. Clear the pad if needed to display the Load

and Record screen.

4. Set Rec Mon to Auto or On if you want the input source to play

through OUT1 and OUT2.

5. Touch the Rec button. The bitbox mk2 will start recording. Use the Rec Quant parameter

to synchronize the timing of the recording with the clock. Recording will start when a

signal is received if you set the Threshold parameter to On.

6. Touch the Stop button. The recording will end. If you configured a recording length,

bitbox mk2 will stop recording when the target length is reached. The file will be saved in

a folder with the same name as the preset under the \Presets folder on the microSD card.

When To Use It

Play single notes, free playing audio samples

or drum hits.

to get more realistic instrument pitch

shifting or to map different sounds to each

key on the keyboard.

Synchronize loops and quantize playback,

e.g. drum loops and guitar tracks between

one and eight measures long.

Independently trigger different sections of a

WAV file.

Generate new sounds from your samples.

The sample is played back in small portions

about 10 to 200ms in length, called grains.

Start recording a new WAV file or clear a

WAV from a pad.

Start recording a new set of WAVs for use in

multi-sampling.

MIDI INPUT

Notes C2 (MIDI 36)

through G2 (MIDI 43)

will trigger pads.

GATE INPUTS

Send a High

signal to trigger

the pad.

Reverse

Beat

Set Loop

Playback

Sync

Points

EXT 1-4

Map to

parameters for

modulation.

Load and Record

Play

Slices

Page 3