Ambient Weather RC-8365 Benutzerhandbuch - Seite 9
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Radiowecker Ambient Weather RC-8365 herunter. Ambient Weather RC-8365 14 Seiten. Clearview radio controlled projection clock with indoor and outdoor temperature
Seite drucken
5.5 Wireless Sensor Display
No Description
1
Low Battery Indicator
2
Temperature
3
Temperature Units of Measure (°F or °C)
5.6 Wireless Sensor Low Battery Indictor
When the battery is full, no battery icon will be displayed. When the battery is low, the low battery
indicator
will be displayed. Replace with 2 new AA size batteries. Pay attention to the
polarity.
5.7 Viewing the Wireless Sensor Channels
In normal time mode, press the UP button to view wireless channels 1, 2 and 3.
To automatically scroll through channels 1, 2
beep will sound). The wireless channels will scroll on the screen every 5 seconds.
5.8 Resyncing the Wireless Sensor
If you lose synchronization from the remote wireless sensor for an extended period of time or you
replace the batteries in the wireless sensor, you may need to reset the console. To reset the console,
disconnect from AC power and remove the batteries for 10 seconds, then reinsert the batteries and
reconnect AC power. Alternately, you can press the reset button on the back of the console.
5.9 Adding Multiple Wireless Sensors
If you introduce additional sensors into the system, you will need to reset the console.
1. Set the Channel number on the wireless sensor per Figure 2. Power down and up the
sensor after you have changed the channel number for the change to take effect.
2. Reset the console. To reset the console, disconnect from AC power and remove the
batteries for 10 seconds, then reinsert the batteries and reconnect AC power.
Alternately, you can press the reset button on the back of the console.
5.10 Min and Max Records
Select the appropriate channel to view the min and max records as outlined in 5.7.
Version 1.0
©Copyright 2018, Ambient LLC. All Rights Reserved.
No Description
4
Temperature Channel Number
5
Channel Number (default = 1) and
Reception Icon (on when searching, flashes
when updates)
Figure 8
,
and 3, press and hold the UP button for 2 seconds (the
Page 9