Ambu aScope 3 Manual rápido
Navegue en línea o descargue pdf Manual rápido para Equipamiento médico Ambu aScope 3. Ambu aScope 3 2 páginas. Intubation and single lung ventilation
También para Ambu aScope 3: Manual rápido (2 páginas)
Imprimir página
Ambu
aScope
®
- Quick Guide for bedside bronchoscopy & PDT
1.
Functions
aScope 3 is a single-use sterile flexible videoscope with a 2.2 mm working
channel. Immediate accessibility, portability and fast setup as well as no risk
of cross-contamination make aScope 3 ideal for bedside bronchoscopy in
the ICU department.
Immediately after the aScope 3 has been connected to the aView monitor
an image is displayed on the screen.
It is easy and convenient.
Warning: Read Instructions For Use before using the Ambu
2.
Connecting the system
1. & 2. Connect aScope 3 or aScope 3 Slim to the
aView by plugging the aScope 3 connector
- white with blue arrow - into the corresponding
blue female connector on the side of aView.
3.
Preparation for use
•
Ensure that the aScope 3 fits the ET tube of the patient.
The aScope 3 can be used with ET tubes size 6 and up.
•
A small amount of lubrication on the aScope 3 cord can be
used to ease the insertion of the aScope 3 cord. Do not get
lubrication or any other contaminant on the tip of the aScope 3.
•
Confirm that the bending section functions smoothly and correctly
by carefully sliding the control lever forward and backward.
•
Confirm that the bending section returns to a straight position.
•
Attach the suction tube to the suction connector and ensure
that the suction works when pressing the suction button.
•
Fluids can be instilled through the working channel by
inserting a syringe into the working channel port at the top
of the aScope 3. When using a Luer Lock syringe, use the
enclosed introducer.
The enclosed introducer can also be used to facilitate the
insertion of soft accessories such as microbiology brushes.
3
™
aScope
3 and Ambu
®
™
3. Push the ON/OFF
button on the aView
to start up the system.
Before use ensure that the accessory is compatible with the
aScope 3 working channel.
•
Connect the aScope 3 to the aView and verify that a live video
image appears on the screen.
•
Always have an additional aScope at hand as a precaution.
aView.
®
4. The real time image
will appear on aView
after only a few seconds
and the aScope 3 system
is ready to use
Turn the page