Amcargobikes Classic Instrucciones de montaje - Página 2
Navegue en línea o descargue pdf Instrucciones de montaje para Bicicleta Amcargobikes Classic. Amcargobikes Classic 16 páginas. Cargo bike with mechanical disc breaks
Imprimir páginaStep 1: Assembly of the back and front frame
• When the parts have been taken out of the boxes and wrapping, place the front frame upside
down on a table or two chairs.
• Place the back frame upside down "on top" of the front frame. Avoid taking the plastic on the
luggage carrier off to avoid scratches in the paint.
• The main bolt is mounted from below as shown in picture 1A, 1B, and 1C by using a hammer or
something similar. It should fit tightly. The bearings should be lubricated with grease. Do not
tighten the nut yet.
• With the 7 large bolts, washers and nuts mount the bow-shaped and the two straight metal rods
as shown on picture 1C, 1D and 1E. The metal rods must be placed below the trazezodial plate
as shown in picture 1F. In order to avoid that the stainless steel locknuts get stuck halfway
down on the bolt, use some grease at the end of the bolts, before the nut is tightened.
• Only when these are tightened, tighten the large nut on the main bolt as hard as possible and
insert the split (see picture 1F).
Picture 1B
Picture 1A
Page 2