AMCI SD17060B-25 Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Servoaccionamientos AMCI SD17060B-25. AMCI SD17060B-25 20 páginas. Stepper drives

UL/CUL RECOGNIZED INSTALLATIONS

The SD17060B is an Underwriter Laboratory Inc.

"Industrial Control Equipment" under the control number 60GB. The UL file num-

ber is E231137. The SD17060B is appropriate for UL and CUL installations.

UL Required Information

If your installation is to meet UL requirements, you must be aware of the following information when using

the SD17060B.



Maximum surrounding air temperature is +50°C



The SD17060B does not incorporate internal motor overload protection.



The SD17060B does not provide motor over temperature protection.



The SD17060B does not provide overspeed protection.



The SD17060B shall be used in pollution degree 1 or 2 environments. If the SD17060B is mounted in

an enclosure, this enclosure must meet these requirements.



All wiring to the SD17060B shall be R/C (AVLV2), minimum rating of 80°C, 300V, except secondary

low-voltage circuit wiring.



Use 75°C copper conductors only.



Terminals shall be tighten to manufacturer's recommended torques



Power Connector shall be rated for a minimum 12A, 600V, in a pollution degree 2 environment



Motor Connector shall be rated for a minimum 16A, 600V, in a pollution degree 2 environment



I/O Connector shall be rated for a minimum 8A, 300V, in a pollution degree 2 environment

† The mating connectors that are supplied with the SD17060B meet these requirements. Additional mating

connectors can be ordered from AMCI under the part number AK-17060.

20 Gear Drive, Plymouth Ind. Park, Terryville, CT 06786

Tel: (860) 585-1254 Fax: (860) 584-1973 http://www.amci.com

listed device. It is listed as

†