FLO-DYNAMICS TSD450 Instrucciones de inicio rápido
Navegue en línea o descargue pdf Instrucciones de inicio rápido para Equipos de servicio FLO-DYNAMICS TSD450. FLO-DYNAMICS TSD450 6 páginas. Transmission fluid exchange machine with chemical injection
Imprimir página40201043
TSD450 LCDC
QUICK START
Transmission Fluid Exchange
INSTRUCTIONS
Machine with Chemical Injection
OPERATION
NOTE: This machine is fully interactive. Always follow the on-screen instructions.
SAFETY RECOMMENDATIONS
Use extreme safety measures when working around a running engine.
Always block the vehicle's drive wheels.
Ventilate the vehicle's exhaust.
Always wear safety glasses.
It's a good idea to wear gloves.
PREPARATION
Road test the vehicle for at least one mile.
Make sure there are no problems with the transmission
such as leaks, low fluid level, shifting issues, etc.
Connect battery cables to vehicle's battery.
PERFORMING A DIPSTICK EXCHANGE
Press 2 for Dipstick Exchange.
Add Transmission Cleaner.
See "Adding Chemicals" section.
Press 1 for Normal Exchange. When this is selected, the
machine will complete the exchange without prompting you
to change the vehicle's transmission filter.
Press 2 for Filter Replacement. When this is selected, the
machine will pause during the exchange and prompt you to
change the vehicle's transmission filter. Follow the on-
screen instructions.
Connect red and gray service hoses to chrome manifold.
Insert nylon tube down dipstick tube the same length as the
dipstick, being cautious not to insert too far.
Use the yellow ▲▼ arrow keys to select the desired
amount to be exchanged. Press the green button to
proceed.
Flo-Dynamics, Inc. • 3300 Reedy Drive • Elkhart, IN 46514 • 800-303-5874
Page 1 of 6