AMCON EQ-6002 Manual del usuario - Página 11

Navegue en línea o descargue pdf Manual del usuario para Proyector AMCON EQ-6002. AMCON EQ-6002 12 páginas. Automatic chart projector

Automatic Chart Projector - EQ-6002

________________________________________________________________

Turn the power switch off and disconnect the power supply plug. The fuse holder

is located just below the power supply socket. Pull on the fuse holder to remove

it. The fuse will be removed together with the holder. Remove the blown fuses

and insert the new fuses on the cap of the fuse holder and install it as before.

6.4 Changing the Channel Setting of the Remote Control

Turn the power switch off and unplug the power cable. Remove the lamp cover

screws and the screw on the lower cover (four in total) and lift the top to remove

it. Change the DIP switch 5 and 6 according to the diagram. Remove the battery

cover from the back of the remote controller and change the channel switch S.

Replace the top cover after completing the DIP switch setting, tighten the screws

on the lower cover and then tighten the lamp cover with attaching screw.