Acer Veriton X270 Manual del usuario - Página 20
Navegue en línea o descargue pdf Manual del usuario para Portátil Acer Veriton X270. Acer Veriton X270 39 páginas. Acer veriton z280g: supplementary guide
También para Acer Veriton X270: Mejoras del servicio (1 páginas)
Imprimir página
10
Installation precautions
Before you install any computer component, we recommend that you
read the following sections. These sections contain important ESD
precautions along with preinstallation and post-installation
instructions.
ESD precautions
Electrostatic discharge (ESD) can damage your processor, disk drives,
expansion boards, and other components. Always observe the
following precautions before you install a computer component:
1
Do not remove a component from its protective packaging until
you are ready to install it.
2
Wear a wrist grounding strap and attach it to a metal part of the
computer before handling components. If a wrist strap is not
available, maintain contact with the computer throughout any
procedure requiring ESD protection.
Preinstallation instructions
Always observe the following before you install any component:
1
Turn off your computer and all the peripherals connected to it
before opening it. Then unplug all cables from the power outlets.
2
Open your computer according to the instructions on page 10.
3
Follow the ESD precautions described above before handling a
computer component.
4
Remove any expansion boards or peripherals that block access to
the DIMM sockets or component connectors.
5
See the following sections for specific instructions on the
component you wish to install.
Warning! Not turning off the computer properly before you start
installing the components may cause serious damage. Do not
attempt the procedures described in the following sections unless
you are a qualified service technician.
3 Upgrading your computer