ACR STOVES Earlswood III Manual técnico - Página 6

Navegue en línea o descargue pdf Manual técnico para Estufa ACR STOVES Earlswood III. ACR STOVES Earlswood III 17 páginas. Multifuel stove

This appliance is equipped with a pre-fitted manufacturers smoke exempt stop. Under

no circumstances should it be tampered with or removed unless expressly authorised

by a competent person and the appliance is not installed in a smoke exempt area.

If the appliance is to be installed in a non smoke exempt area you can remove the

restricting screw on the secondary air control (on right hand side under the ash lip)

to allow full movement of the secondary air slider.

The appliance is supplied pre-assembled with the flue spigot in the top exit position.

If you intend to install the appliance using a rear flue connection, the blanking plate should be

swapped over as follows:

• Remove the internal vermiculite baffle

(for further instruction please see

under maintenance heading).

Assembly of the unit

• Remove the rear metal cut out plate

from the back of the stove

• Remove the rear blanking plate

• Remove the flue spigot from the top

exit by removing the securing bolts

and rope seal

• Refit the rope seal and flue spigot to

the rear exit and secure with the bolts

• Refit the blanking plate to the top exit

using the rope seal and retaining bolts