Amcrest IP5M-F1180EW-V2 Manual del usuario - Página 17

Navegue en línea o descargue pdf Manual del usuario para Cámara de seguridad Amcrest IP5M-F1180EW-V2. Amcrest IP5M-F1180EW-V2 20 páginas. 5mp v2 ultrahd fisheye poe camera

Imprimir página
13.
Click apply, then exit this menu to go back to the main menu, then re-enter the UPnP menu, and ensure
the UPnP status says, "Mapping Successful".
14.
Open a web browser and enter in the DDNS domain name address from step 9, enter in a colon, then type
the port number from step 4 on to the end.
a. For example, if the DDNS domain name is http://abc123456789.AmcrestDDNS.com and your HTTP Port is 33333,
the URL would be http://abc123456789.AmcrestDDNS.com:33333
15.
The browser may prompt you to install a plugin. Click install to download the plugin, and then click on the
plugin installation file to install the plugin.
16.
If the browser prompts you to allow the plugin to work on the computer, hit Allow to ensure the plugin
can run successfully.
17.
Enter in login details into the username and password fields and click login.
Port Forwarding Remote Web Access Setup
Port Forwarding is an alternative method to setting up remote access for Amcrest cameras. This method should
only be used if the UPnP/DDNS Remote Access method did not work.
Below is a step-by-step walkthrough that details how to setup the camera for Remote Web Access using Port
Forwarding:
1.
Login to your camera, open the main menu then go to Setup -> Network.
2.
Open the TCP/IP settings screen.
3.
By default, the camera has the mode set to DHCP. Ensure that DHCP is selected. The IP Address, Subnet
Mask, Default Gateway, Preferred DNS, and Alternate DNS should all be 0s if DHCP is selected.
4.
Click Save to save these settings. This should now open the main menu.
5.
From the main menu, go to Setup -> Network.
6.
On the TCP/IP settings screen, the IP Address, Subnet Mask, Default Gateway, Preferred DNS, and
Alternate DNS should all be populated.
7.
Click the radio button next to Static, to change the mode to Static.
8.
Write down the IP Address that is currently in the IP address field.
9.
Click the Save button.
10.
Using the left-hand menu, go to the Connection menu, and write down the TCP, UDP, and HTTP port
number. It is recommended to ensure that these port numbers are at least 5 digits long to prevent any port
conflicts. If need be, change each of these port numbers to a 5-digit number that is less than 65535, note the
numbers down, and click save before proceeding to the next step.
11.
Go to
http://www.canyouseeme.org/
open.
12.
Write down the manufacturer name, brand, and model name for the router that the camera is connected
to, and then proceed to
http://www.portforward.com
13.
Open the port forwarding guide section on the left-hand side menu.
14.
Find the router brand name in the list and click it.
15.
Find the router model number and click it.
16.
Click the Default Guide link near the middle of the page.
17.
This guide will help you take the step necessary to port forward on the router. Follow these steps, and
then return to the camera.
18.
Login to your camera, open the main menu then go to Setup -> Network.
19.
Click the DDNS menu item on the left-hand menu, pick AMCRESTDDNS from the drop-down box, click the
checkbox next to Server Type, and then click the Save button on the bottom right.
20.
To set a custom DDNS name, fill out the Domain Name field and click Save.
21.
Write down the entire Domain Name field, including the white text that says AmcrestDDNS.com
and check to ensure each of the port numbers specified in step 10 is
on your web browser.
17