ACR STOVES Malvern II Manual técnico - Página 3
Navegue en línea o descargue pdf Manual técnico para Estufa ACR STOVES Malvern II. ACR STOVES Malvern II 17 páginas. Multifuel stove
Imprimir página
Nominal heat output
Chimney draft required
Height
Width
Depth
Weight
Air Requirement
Flue Mass Gas Flow
2
CO @ 13% O
Mean Flue Gas Temperature
Efficiency
Mean CnHm @13%O2
Mean NOx @13%O2
DIN Plus Dust @13%O2
Log Length
*** Please note that Building Regulations Document J advises that additional permanent air supply is
required for appliances with an output of above 5Kw.
With modern properties additional air may be required as Document J suggests that adequate air
would be a benefit.
• If design air permeability ≥5.0m³/ (h.m²) then 550mm²/kW of appliance rated output above 5kW
Or
• If design air permeability ≤5.0m³/ (h.m²) then 550mm²/kW of appliance rated output
• If in doubt, please consult your registered installer for advice.
If installing into a room containing an extractor fan, please ensure that the relevant tests are
carried out according to Document J of the building regulations.
Earlswood III Specifications
5 kW - Wood
12Pa
536 mm
480 mm
356 mm
82 kg
N/A ***
3.8 g/s - Wood
0.09 Wood vol %
228°C - Wood
84.3% - Wood
Wood - 102Nmg/M3
Wood -113Nmg/M3
Wood -19Nmg/M3
Up To 350 mm
480
435
5 kW - Ancit
3.3 g/s - Ancit
0.11 Ancit vol%
270°C - Ancit
82.3% - Ancit
Ancit - 26Nmg/M3
Ancit - 136Nmg/M3
Ancit -18 Nmg/M3
330
260
281
370