Amcrest HDCVI Manual de inicio rápido - Página 3

Navegue en línea o descargue pdf Manual de inicio rápido para DVR Amcrest HDCVI. Amcrest HDCVI 7 páginas.

1. Loosen the screws of the

upper cover and side panel.

4. Turn the device upside down

and then turn the screws in

firmly.

in the chassis.

7. Put the cover in accordance

with the clip and then place the

upper cover back on.

Note:



You can connect the HDD data cable and the power cable first and then fix the HDD in the

device.



Please pay attention to the front cover. It adopts a vertical sliding design. You need to push

the clip first and then push down.

4. Front Panel

The front panel is shown as in Figure 1.

Please refer to the following sheet for front panel button information.

Name

Power button

 / 

Down

2. Attach four screws in the

HDD (Turn just three times).

Attach the HDD firmly.

8. Secure the screws in the

rear panel and the side panel.

Figure 1

Icon

Function

Power button, press this button for three seconds to boot up

or shut down the DVR.

Activate current control, modify setting, and then move up

and down.

3. Place the HDD in accordance with

the four holes in the bottom.

6. Connect the HDD cable and

power cable.