ACR STOVES Oakdale FB1MF Manual técnico - Página 6

Navegue en línea o descargue pdf Manual técnico para Estufa ACR STOVES Oakdale FB1MF. ACR STOVES Oakdale FB1MF 17 páginas. Multifuel cast iron stove

Oakdale FB1 A5 0414-1 30/04/2014 16:27 Page 6

This appliance is equipped with a pre-fitted manufacturers smoke

exempt stop. Under no circumstances should it be tampered with or

removed unless expressly authorised by a competent person and the

appliance is not installed in a smoke exempt area.

If the appliance is to be installed in a non smoke exempt area you can

remove the restricting screw on the secondary air control (indicated by

the two holes) to allow full movement of the secondary air slider.

The appliance is supplied pre-assembled with the flue spigot in the top exit

position.

If you intend to install the appliance using a rear flue connection, the blanking

plate should be swapped over as follows:

• Remove the internal baffle plate

• Remove the rear metal plate from the

back of the stove

Assembly of the unit

• Remove the rear blanking plate

• Remove the flue spigot from the top

exit by removing the securing bolts

and rope seal

• Refit the rope seal and flue spigot to

the rear exit and secure with the bolts

• Refit the blanking plate to the top exit

using the rope seal and retaining bar