AMD SB710 Manual del usuario - Página 12
Navegue en línea o descargue pdf Manual del usuario para Hardware informático AMD SB710. AMD SB710 20 páginas. Based m/b for socket am2/am2+/am3 series quad core processor
También para AMD SB710: Manual del usuario (19 páginas), Manual del usuario (20 páginas)
Imprimir página** We recommend that you use an ATX 12V Specification 2.0-compliant power
supply unit (PSU) with a minimum of 350W power rating. This type has 24-pin
and 4-pin power plugs.
** If you intend to use a PSU with 20-pin and 4-pin power plugs, make sure that the
20-pin power plug can provide at least 15A on +12V and the power supply unit
has a minimum power rating of 350W. The system may become unstable or may
not boot up if the power is inadequate.
** Please refer to Figure 1 for 20-pin power plug connection. Power plug and
motherboard power connectors has adopted key design to avoid installation
mistake through connection can be made easily if in the proper direction. If the
installation direction is incorrect and you make the connection by force both the
board and the power supply can be burned. Please see to it that the direction is
correct during installation.
Figure 1: 20-pin power plug
(2) ATX 12V Power Connector (8-pin block): ATX12V
This is a new defined 8-pins connector that usually comes with ATX Power
Supply. The ATX Power Supply which fully supports Socket AM2+/AM3
processor must including this connector for support extra 12V voltage to
maintain system power consumption. Without this connector might cause
system unstable because the power supply can not provide sufficient current for
system.
(3) PS/2 KB/MS Connector: from UK1
This purple connector is a standard PS/2 KB/MS connector for KB/MS.
(4) USB 2.0 Port connector: USB from CN5/ UL1
USB 2.0 port is for user to attach USB 2.0 device to system.
Pin 1
9
Figure2: 24-pin power plug