Flomec QS200 Manual del usuario del producto - Página 4
Navegue en línea o descargue pdf Manual del usuario del producto para Accesorios Flomec QS200. Flomec QS200 16 páginas. Insertion ultrasonic flowmeter options for large pipe sizes
También para Flomec QS200: Manual de instalación (8 páginas), Manual del usuario del producto (20 páginas)
Imprimir página
GENERAL SAFETY INSTRUCTIONS
IMPORTANT: It is your responsibility to:
•
Ensure that all equipment operators have access to adequate instructions
concerning safe operating and maintenance procedures.
4
This product is not approved for use with petroleum products
(diesel fuel, unleaded gasoline, jet fuel, kerosene, etc.),
aromatic hydrocarbons or other incompatible chemicals
This product is not approved for use in hazardous locations.
When applying power, adhere to specifications listed in
appropriate electronics manual.
Disconnect external power before attaching or detaching
input or output wires.
NOTE: Be sure O-rings and seals are kept in good repair.
Compatibility of this product's material and the process fluid
and/or environment should be considered prior to putting
into service.
Product should never be operated outside its published
specifications for temperature or pressure. See
specifications for your model.
Make sure flow and pressure have been eliminated from
process pipe prior to installing or removing product.
Installation near high electromagnetic fields and high current
fields is not recommended and may result in inaccurate
readings.
Do not allow water to freeze in meter. Ice expansion may
burst the plastic housing.
Do not allow this meter to be used with steam.
Thermal expansion/contraction of plastic pipe can cause
clamps to loosen. Make sure clamps are ALWAYS tight
(Recommended Torque is 75 IN·LB).