AMD SB750 Manual del usuario - Página 10

Navegue en línea o descargue pdf Manual del usuario para Placa base AMD SB750. AMD SB750 20 páginas. Based m/b for amd socket am3+ series processor
También para AMD SB750: Manual del usuario (20 páginas)

Imprimir página

4. Open the socket by

pulling the level

sideways away from the

socket and then upwards

to a 90-degree angle.

2-4 Memory Installation

This motherboard provides two 240-pin DDRIII DUAL INLINE MEMORY MODULES

(DIMM) socket for DDRIII memory expansion to maximum memory volume of 8 GB.

Valid Memory Configuration

Bank

DDRIII1

DDRIII2

Total

Recommend DIMM Module Combination

One DDRIII Memory Module ----Plug in DDRIII1

Two DDRIII Memory Modules---Plug in DDRIII1 and DDRIII 2 for Dual channel

function

Dual channel Limited!

1. Dual channel function only supports when 2 DDRIII memory modules plug in either both

DDRIII1 & DDRIII2.

2. Memory modules plugged in DDRIII1 & DDRIII2 must be of the same type, same size,

and same frequency for dual channel function.

Install DDRIII modules to your motherboard is not difficult, you can refer to figure

below to see how to install a 240-Pin DDRIII 800/1066/1333 module.

5. Insert compatible CPU

into CPU socket and see

to it that CPU Pin-1

should be matched into

CPU socket Pin-1 during

installation.

240-Pin DIMM

DDRIII 800/1066/1333

System Memory (Max 4 GB)

DDRIII1 & DDRIII2:

Dual Channel

6. Put the level to the

original place of the

socket. Make sure that

the notched corner

should point towards

the end of the level.

PCS Maximum Capacity

：

4GB

8GB