AMD RCS-100 Manual del usuario - Página 5
Navegue en línea o descargue pdf Manual del usuario para Equipamiento médico AMD RCS-100. AMD RCS-100 12 páginas. Multipurpose camera & scope system
Imprimir página
2) Fingers pinch the specula replacement device and pull
it outward until the specula fall off.
Warning:
The disposal of specula shall meet requirements of local
laws and regulations.
7.3 Battery replacement
1) Hold down and push out the battery cover with your
fi ngers and remove the battery cover.
2) Remove the original battery and the battery cable.
3) Hold the battery cable with your thumb and forefi nger
and connect it to the connector in the correct direction.
4) Put the battery into the battery compartment and tidy up
the cable. See 3.2 for type of battery.
5) Replace the battery cover by pushing it up in lock
position.
Warning:
If the device is unlikely to be used for an extended time pe-
riod, remove the batteries prior to shipping or storage by
skilled or trained person.
7.4 Power-on/off
1) Press power button for 3 seconds to power on/off the
system.
2) After power on the screen display the startup picture.
3) About 25 seconds, the system completed start-up and
automatically recognizes the lens (if a lens is installed)
and display the appropriate main page.
7.5 Indicator LED
An indicator on the top left corner of the device shifts in white
and green to show device status.
• The handset works in sleep mode: green light fl ashing
• Low battery: white light fl ashing
• Battery charging: white light is on
• Full charged: green light is on
7.6 Settings
Tap
to enter the setting page.
User can set parameter by select item in setting list and
touch screen. It is recommended that all setting items are
set according to user's requirements for fi rst-time use .
Tap to enter the setting page.
17
Patient data:
"Patient data" can be enabled/disabled.
If disable, the patient information icon
shown on the screen and the photos/videos record name is
excluding the patient last name, fi le name setting will also
be invisible and deactivated.
If enable, fi le name setting will be visible to choose.
• File name format:
User can choose shooting time or last name appears fi rst
in the record name.
Patient
File Name Rule
info
enable
Last Name
OT
+
Shooting Time
DE
GE
Shooting Time
OT
+
Last Name
DE
GE
disable
OT
DE
GE
• Font size:
User can set the system font size to small, normal, large
or extra large.
• Date & time:
User can set the current date & time.
• Language:
User can set system language as "English, Chinese, Ger-
man, Spanish, Russian, French, Italian, Arabic".
• LCD backlight:
User can set LCD screen backlight brightness.
• Right handed mode:
•
•
•
left handed
User can set left / right handed operation mode according
to their operating habits.
• Preserve lens setting:
The system can be set to ‚default' mode or ‚record kee-
ping' mode. When the lens is changed in ‚default' mode,
the system will reset to default parameters. When the lens
is changed in ‚record keeping' mode, the parameters of the
last used lens would be preserved.
• Picture preview time:
When a photo is taken, the photo can be previewed for 2,
3, or 5 seconds. The user can set the preview time to meet
their requirements.
• Dermatoscope ruler unit:
There is a software ruler in the main interface of dermato-
scope, user can set the software ruler unit to mm or inch.
will not be
Module
File Name
Last name + shooting time +
O + L/R
Last name + shooting time +
D
Last name + shooting time +
G
shooting time + Last name +
O + L/R
shooting time + Last name +
D
shooting time + Last name +
G
shooting time + O + L/R
shooting time + D
shooting time + G
right handed