CNX Mini Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Receptor CNX Mini. CNX Mini 18 páginas.

Imprimir página

1. III. Remote Control Unit (Rcu)

GENERAL INFORMATION

V. REAL PANEL

1. LNB IN

Connects to Satellite antenna cable.

2. LNB OUT

Connects to another STB.

3. DIGITAL AUDIO

Output for connecting to a digital amplifier.

4. AUDIO-R

Connects to AUDIO RIGHT to TV or other equipment.

5. VIDEO

Connects VIDEO to the TV or other equipment.

6. AUDIO-L

Connects to AUDIO LEFT to TV or other equipment.

7. YUV

Connects to TV the YUV jack of TV.

8. DIGITAL AUDIO

Output for connecting to a digital amplifier.

9. S-VIDEO

Connects to teh S-VHS jack of TV or VCR

10. TV/VCR

Connects to TV or VCR.

11. ANT

Connects to TV antenna input.

12. RS 232

Connects to personal computer for software upgrade.

13. POWER SUPPLY

90~250V AC, 50/60Hz, 40W.

14. POWER BUTTON

Turns On/Off.

INSTALLING EQUIPMENT

This section explains several ways of connecting the receiver to your existing

TV, VCR and Hi-Fi system.

You can choose one of the following setups that we recommend.

If you have any problem or need help, consult your dealer or service provider.

Please ensure that the following items are included with the receiver in your packing.

I. CONNECTING THE RECEIVER TO TV AND VCR WITH CINCH CABLE

I-1. Connecting the receiver to TV with the CINCH cable

Connect one end of the CINCH cable to the Audio-R(Red), the Audio-L(White) and the

Video(Yellow) socket on the rear panel of the receiver and the other end to the Audio-

R(Red), the Audio-L(White) and the VIDEO (Yellow) socket on the TV.

II. CONNECTING THE RECEIVER TO TV AND VCR WITH RF CABLE

II-1.Connecting the receiver to TV and VCR with RF cable

Connect one end of the

RF cable TV/VCR socket on the rear panel of the receiver and

the other end to the ANT IN on the TV.

Connect one end of the RF cable to the ANT socket on the rear panel of the receiver and

the other end to the ANT OUT on the VCR.