CO/Tech 36-8557 Manual de inicio rápido
Navegue en línea o descargue pdf Manual de inicio rápido para Equipos de iluminación CO/Tech 36-8557. CO/Tech 36-8557 4 páginas. Led grow light
Imprimir páginaLED Grow Light
Art.no 36-8557
Modell FIB75600v1-pt
Please read the entire instruction manual before using the product and
then save it for future reference. We reserve the right for any errors in text or
images and any necessary changes made to technical data. In the event of
technical problems or other queries, please contact our Customer Services.
Safety
Warning:
• Do not use the light if it or its mains lead and plug are damaged in
any way.
• The light should only be connected to a wall outlet with a 230 V,
50 Hz power supply.
• Do not mount the light in an environment where it is exposed to
water, moisture or extreme temperatures.
• Never try to open the product, repair or modify it in any way.
Electric shock hazard
• The bulb in this light fitting must only be replaced by a qualified
electrician.
• Installation and maintenance work on the product involves the risk
of an electric shock.
• If the mains lead is damaged it must be replaced by a cable of
identical specifications as the original.
This product is intended for indoor use only.
Class II luminaire.
The light bulb is not dimmable.
Installation
Warning:
Ensure that there are no electrical wires or water pipes in the ceiling or
wall where you intend to drill/screw.
1. Mount the ceiling bracket using the screw. Use a masonry drill and
wall plug to create an anchor hole if necessary.
2. Press the light fitting into the brackets until it clicks into place.
3. Plug the mains lead into a wall socket.
UITED KINGDOM internet www.clasohlson.co.uk
Connecting several lights together
Up to 10 light fittings can be interconnected. There are two different
ways of connecting the lights together:
1. The first is with a connector, which enables the lights to be joined
end to end.
2. The second is using a series connection cable, which enables
the lights to be joined about 10 cm apart (handy for corner mounting).
Connecting the lights using a connector
1. Push the supplied connector into
the mains socket on the light fitting.
2. Connect the two lights together. Make sure that the connector is securely
inserted and that both lights are securely connected to each other.
3. Repeat the same procedure if you wish to connect additional lights.
Connecting the lights using a connection cable
1. Use the supplied series connection cable to connect the first light to
the second.
2. Repeat the same procedure if you wish to connect additional lights.
Care and maintenance
• The light fitting should be cleaned using a dry cloth or vacuum cleaner.
• Unplug the light fitting from the wall socket if the product is not be
used for an extended period.
Instructions for use
Note
• Distance: The intensity of the light is inversely proportional to
the square of the distance from the source, which means that if you
double the distance between the light and an object, only a quarter
of the light will reach the object. It is therefore important that
the lights are as close as possible to the plants and equally spaced.
• Plant illumination time: Most plants grow better when not exposed
to 24-hour light, they also require a period of darkness.
We recommend that the grow light is used with a timer.
Switch the light fitting on and off
by pressing the power switch.
Handy tip
• It is a good idea to connect the light fitting/s to a wall socket which
is controlled by an on/off switch.
Troubleshooting guide
The light
• Check that the light is turned on.
doesn't
• Make sure that the mains lead is undamaged and
come on.
is securely connected to both the wall socket and
the light.
• Is the wall socket energised?
• Check that any interconnected lights are intact and
properly connected to each other.
Responsible disposal
This symbol indicates that this product should not be
disposed of with general household waste. This applies
throughout the entire EU. In order to prevent any harm to
the environment or health hazards caused by incorrect waste
disposal, the product must be handed in for recycling so that
the material can be disposed of in a responsible manner. When
recycling your product, take it to your local collection facility or contact
the place of purchase. They will ensure that the product is disposed of
in an environmentally sound manner.
Specifications
Rated voltage
220–240 V AC, 50/60 Hz
Mains lead
1.8 m
Bulb
LED
Photosynthetic photon flux
17 μmol/s
PPF
PPFD @20 cm
10 μmol/m²/s
Wavelength
Blue 450 nm
Red
660 nm
20 cm
Series connection cable
8.5 W
Wattage
IP20
IP rating
Operating temperature
−30 ºC to +40 ºC
Dimensions
600 × 24 × 35 mm