AME Intl. ACCU-FLATE 24866 Instrucciones de uso - Página 2
Navegue en línea o descargue pdf Instrucciones de uso para Herramienta eléctrica AME Intl. ACCU-FLATE 24866. AME Intl. ACCU-FLATE 24866 3 páginas. Digital tire inflator
Imprimir páginaThank you for selecting this AME Intl.
Accu-Flate. Please read this manual before
carrying
out
any
procedure.
This manual is an integral and essential part
of the product, please keep it away from
damp, heat, dust, oils, do not remove, tear
or amend any parts of the manual for any
reason. It must be made available to the
operator and to maintenance personnel, also
to ensure staff training.
If you lose or damage the manual, ask the
manufacturer for a copy, quoting the Part
No. The manual must always remain with the
machine, in the event of the machine being
sold, it must be given to the new user.
The manufacturer reserves the right to
change
product
without notice.
FEATURES
•
Units of measure (p.s.i., bar, kPa, kgF)
•
I nflates to 12 bar, 174 p.s.i., 1200 kPa, 12
kgF
•
Easy to read backlight LCD display
•
One button operation has 3 functions:
inflates, deflates & measures tire pressure
•
90 second auto off function
•
Tough aluminium die cast body with
rubber sleeve
•
I ndividually calibrated and tested
(see calibration certificate)
•
20 in. (50.8 cm) hose
2
installation
or service
features
at
any
OPERATION
1) Remove tire valve cap.
2) With clip-on air chuck lever depressed,
firmly press chuck onto tire valve stem and
release lever, ensure that no air leaks.
3) Press the tire inflator lever to inflate, press
the lever half-way to deflate.
4) On button: Press the on/unit/light button to
turn on the inflator, if the unit is not used the
inflator will be turned off automatically after
90 seconds.
5) Backlight: When the inflator is on, press the
on/unit/light button to turn on the backlight
when used in low light. The backlight
will turn off automatically in 5 seconds.
time
Backlight will not be activated by turning
on the inflator and can only be activated by
pressing the on/unit/light button once the
unit is turned on.
6) Changing the unit of measure: Press on/
unit/light button for at least 3 seconds to
enter unit change mode, then one quick
press of the on/unit/light button to choose
the desired unit. The unit chosen will
be the default unit until changed by the
above procedure.
7) The batteries used are 2x AAA (included),
once the voltage goes below 2.4V, the
low battery signal on the top left will flash
continuously until new batteries are
installed.
WARNING
To avoid the risk of personal injury, especially
to the eyes, face or skin, DO NOT direct
the air stream at any person, or any part of
the body.
This equipment is not intended for use by
children without adult supervision.
The manufacturer reserves the right to
change product features at any time
without notice.