AMEC TB-520 Manual del usuario

Navegue en línea o descargue pdf Manual del usuario para Equipamiento marino AMEC TB-520. AMEC TB-520 2 páginas. Ais man overboard beacon

Imprimir página
USER GUIDE
TB-520
AIS Man Overboard Beacon
COPYRIGHT
The entire contents of this instruction manual, including any future updates,
revisions, and modi cations, shall remain the property of AMEC at all times.
Unauthorized copies or reproduction of this manual, either in part or whole, in
any form of print and electronic media, is prohibited. The contents herein can
only be used for the intended purpose of this manual.
DISCLAIMER
AMEC is devoted to publish and maintain this product manual. As we continue
to improve our AIS products to satisfy all customers' needs, information in this
document is subject to change without notice. AMEC does not make any
representations or warranties (implied or otherwise) regarding the accuracy
and completeness of this document and shall in no event be liable for any loss
of pro t or any commercial damage, including but not limited to special,
incidental, consequential, or other damage.
WARNING: This device is authorized for use only in a true emergency. Deliberate misuse
may cause expensive rescue disruption and incur penalty.
WARNING: Please carefully read the instructions and get familiar with the test and
activation procedures before using the device.
WARNING: An AIS-MOB Man overboard device is only intended for short range signalling
to an AIS receiver installed onboard your own vessel. It will not directly alert the
emergency services or other vessels.
WARNING: This equipment is not intended for routine tracking of persons or property. This
includes tracking of divers.
WARNING: If self-test is performed more frequently than once a month, then battery life
may be reduced.
2. Equipments in the Box
TB-520 AIS MOB x1
Carrying pouch x1
User guide x1
Oral clip x1
Test tab x1
3. Installing TB-520 on Lifejacket
1) Strap Clip
The TB-520 is supplied as default with a clip to attach the device
to lifejacket strap.
2) Oral Tube Clip
The TB-520 is delivered with an alternative clip which can be
attached to the lifejacket's oral tube. The Clip is designed to be
installed on left or right side of the oral tube.
- 1 -
- 3 -
Alltek Marine Electronics Corporation
14F-2, No. 237, Sec. 1, Datong Rd.,
Xizhi, New Taipei, 22161, Taiwan
Tel: +886 2 8691 8568
Fax: +886 2 8691 9569
Website: www.alltekmarine.com
The AMEC TB-520 is a Man Overboard Beacon using AIS technology. It greatly
enhances the chance of MOB retrieval by alerting nearby vessels equipped
with AIS.
In emergency situations, the beacon can be activated either automatically by
water sensor or manually and send out alert messages, GPS position informa-
tion and a unique ID. Its high performance GPS receiver enables the beacon
quickly obtaining GPS coordinates.
Built with state-of-the-art technology, TB-520 is small and lightweight, easy to
use and totally reliable to keep your journey safe and sound.
1. TB-520 Overview
1) Antenna cap
2) Antenna
3) Battery LED (Green/Red)
4) Strobe LED
5) GPS LED (Green/Red)
6) Lanyard (to prevent loss of parts)
7) Test area
8) Water sensor
9) Test tab with magnet on back side
10) Activation tab
4. Activating your TB-520
Manual activation:
1) Pull o the red antenna cap to
release the antenna.
Caution:
when deploying
antenna, be careful
in its spring action
to avoid eye injury.
2) Pull the activation tab o the TB-520
and the device will start transmitting
alert messages immediately.
Version: 1.1
2
3 4 5
8
6
10
9
1
- 2 -
Water sensor activation:
1) Pull o the red antenna cap to release
the antenna.
Caution:
when deploying
antenna, be careful
in its spring action
to avoid eye injury.
2)When the water sensor embedded at
the bottom side of the device is
immersed in water for more than 3
seconds, the device will be activated
and starts transmission.
- 4 -
7
8