AKSO CLORO Tester Manual de instrucciones - Página 4

Navegue en línea o descargue pdf Manual de instrucciones para Equipos de prueba AKSO CLORO Tester. AKSO CLORO Tester 8 páginas.

4. OPERATING INSTRUCTIONS

MEASUREMENT

Preparation

1) Make sure that the temperature of the water sample to

be analyzed is between 15 and 35°C to ensure the best

accuracy in the chlorine measurement;

2) Wash the cuvette 3 to 4 times using the water sample

that will be analyzed to set the container, avoiding

reading deviations;

3) Fill the cuvette with 10mL of the sample. Notice the line

in the cuvette body;

4) Close the cuvette with its lid;

5) Clean and dry the outer wall of the cuvette, using a wipe

or soft towel paper, to eliminate residues, grease and

moisture that may interfere with the measurement;

Zero point adjust

6) Press the Power-Measurement button to turn on the

instrument. Will appear Insert reference;

7) Insert the cuvette into the compartment and close the

measurement cover;

8) With the instrument in the VERTICAL position, briefly

press the button. The sample will adjust at zero point;

9) The message: Analyzing reference will appear on

display;

10) Wait until the display shows the message Insert

reagent;