Coaire CNCM10 Manual de instalación y funcionamiento - Página 4

Navegue en línea o descargue pdf Manual de instalación y funcionamiento para Deshumidificador Coaire CNCM10. Coaire CNCM10 18 páginas. Non-cycling refrigerate air dryers

Imprimir página

Carefully read instruction manual before attempting any service or maintenance procedures on the dryer.

Caution warning sign. Risk of danger or possibility of damage to equipment, if related text is not followed properly.

Electrical hazard. Warning message indicates practices or procedures that could result in personal injury or fatality if not

followed correctly.

Danger hazard. Part or system under pressure.

Danger hazard. High temperature conditions exist during operation of system. Avoid contact until system or component

has dissipated heat.

Danger hazard. Treated air is not suitable for breathing purposes, serious injury or fatality may result if precautions are

not followed.

Danger hazard: In case of fire, use an approved fire extinguisher, Water is not an acceptable means in cases of

electrical fire

Danger hazard. Do not operate equipment with panels removed.

Maintenance or control operation to be performed by qualified personnel only 1 .

ARIA

Compressed air inlet connection point.

AIR

LUFT

AIR

ARIA

Compressed air outlet connection point.

AIR

LUFT

AIR

Condensate drain connection point.

Operations that can be performed by the operator of the machine, if qualified 1 .

NOTE :

Text that specifies items of note to be taken into account, does not involve safety precautions.

In designing this unit a lot of care has been devoted to environmental protection:

• CFC free refrigerants

• CFC free insulation parts

• Energy saving design

• Limited acoustic emission

• Dryer and relevant packaging composed of recyclable materials

This symbol requests that the user heed environmental considerations and abide with suggestions annotated with this

symbol.

1 Experienced and trained personnel familiar with national and local codes, capable to perform the needed activities, identify and

avoid possible dangerous situations while handling, installing, using and servicing the machine. Ensuring compliance to all

statutory regulations

1.1 DEFINITION OF THE SAFETY SYMBOLS