Coalbrookdale GS1i Instrucciones de instalación y mantenimiento - Página 10

Navegue en línea o descargue pdf Instrucciones de instalación y mantenimiento para Estufa Coalbrookdale GS1i. Coalbrookdale GS1i 19 páginas.

TO LIGHT THE STOVE

If the pilot is not alight, follow procedure to light pilot.

Turn the control knob anti-clockwise until the full on

position (

) (See Fig. 13). The main burner will light. At

this setting the pressure should be 17.7+/-1.0mbar with

an inlet pressure of 20mbar for natural gas or 36 +/-

1.0mbar with an inlet pressure of 37mbar for propane.

Depress and turn the control knob clockwise to the pilot

position (

) (Fig. 14). The stove will go out and the pilot

will remain alight. Remove the pressure gauge and

replace the test point sealing screw.

Turn stove to maximum setting (

for gas soundness.

TO TURN STOVE OFF

Turn the gas control knob to the minimum gas rate

position (

) (Fig. 16), slightly depress the control knob

and continue turning to the pilot position (

The fire will go out, and the pilot will remain lit and may

be left on permanently.

TO TURN STOVE AND PILOT OFF

Turn the stove off as described. Depress the control

knob, turn to the off position (●) (Fig. 18) and the pilot will

go out.

) (Fig. 15) and check

) (Fig. 17).

FIG. 13

FIG. 14

FIG. 15

FIG. 16

FIG. 17

FIG. 18