Coastal Amusements NEXUS Manual del usuario - Página 3

Navegue en línea o descargue pdf Manual del usuario para Máquinas recreativas Coastal Amusements NEXUS. Coastal Amusements NEXUS 14 páginas.

To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200

It is very important to keep the fans clear of dust and grime. Proper ventilation will keep

the game running correctly. It is important to replace any fan that is not operating correctly. In

addition to the fan(s) in the cabinet be sure to maintain the cooling fan mounted on the

motherboard processor to preserve optimum performance.

Upright cabinets must be placed on a flat and level floor surface. The machine must be

stable and level. Small variations of the floor surface are acceptable and the machine should be

stabilized by use of the leg levelers on the bottom of the machine. Screw in or out the corner

levelers so the machine is stable. Use care in supporting the machine cabinet as the levelers are

adjusted so the machine does not fall over.

Countertop cabinets must follow the same location cautions as the free standing upright,

however best earning results are found when the machine is placed directly on the bar.

Placement must be in an area that is suitable and provides a stable base for the equipment to

rest. Caution must be taken that power cord and machine are not situated close to sinks,

dishwashing equipment or other areas where water may cause hazard or damage to the machine.

Before handling any electronic boards, please be careful and prevent electrostatic

discharge. (ESD) Always make sure you are properly grounded when handling electronic

boards. All power needs to be disconnected before any service is performed. Always check

that all connections are inserted correctly before power up.

NOTE: ONLY QUALIFIED PERSONNEL SHOULD SERVICE

THIS GAME.

NOTE: To Access Main Components (Countertop model):

Unlock rear lock and carefully pull out tray.

FAN CLEANING

UPRIGHT CABINETS

COUNTERTOP CABINETS

CIRCUIT BOARD HANDLING