Coastal Amusements TOY SOLDIER Manual de instrucciones - Página 13
Navegue en línea o descargue pdf Manual de instrucciones para Máquinas recreativas Coastal Amusements TOY SOLDIER. Coastal Amusements TOY SOLDIER 16 páginas.
También para Coastal Amusements TOY SOLDIER: Manual de instrucciones (16 páginas)
Imprimir página
(3) 『C0』 will also blink during the operation when players try to damage and/or cheat the machine
with improper method to touch coin SW. Power off and on again, the machine should return
back to its normal operation.
(4) At using coin selector with sensor device to count coin ins,『C0』will blink when sensor device
is out of function or blocked.
7. Gantry does not return to its home position:
(1)
If power off and on again the gantry still does not return to its home position, then check if
stop-back SW (Gantry & Assembly I No. 23) or stop-left SW (Gantry & Assembly I No. 21) are in
proper position. Also check if their connecting wires are properly connected.
(2) P.C.B. is out of function.
8. Gantry does not move either forward and/or backward by joystick operation:
(1) Check if forward and backward SW wires of joystick are properly connected or if SW are out of
function.
(2) Check if J1 connecting pin of P.C.B. is properly connected.
(3) Check if stop-front SW (Gantry & Assembly I No. 22) or back-stop SW (Gantry & Assembly I No.
23) are in proper position. Also check if their connecting wires are properly connected.
(4) Check if Front/Back motor is out of function or if its wires are properly connected. Also check
if its shaft pinion is properly positioned.
(5) Check if J4 connecting pin of P.C.B. is properly connected.
(6) Check if all connecting pins of gantry are properly connected to the machine.
9. Gantry does not move to left and/or right:
(1) Check if left and/or right SW are out of function or if their wires are properly connected.
(2) Check if J1 connecting pin of P.C.B. is properly connected.
(3) Check if stop-left SW (Gantry & Assembly I No. 21) is in proper position.
(4) Check if Left/Right motor is out of function or if its wires are properly connected. Also check if
its shaft pinion is properly positioned.
(5) Check if J4 connecting pin of P.C.B. is properly connected.
(6) Check if all connecting pins of gantry are properly connected.
10. Claws does not lower down by【Descend】button operation, but only until time's up:
(1) Check if【Descend】button is functioning properly.
(2) Check if connecting wires of【Descend】button are properly connected.
(3) Check if J1 connecting pin of P.C.B. is properly connected.
- 12 -