Coastal Electronic Lockpick C8R Manual de instrucciones de instalación y funcionamiento - Página 7
Navegue en línea o descargue pdf Manual de instrucciones de instalación y funcionamiento para Cámaras de salpicadero Coastal Electronic Lockpick C8R. Coastal Electronic Lockpick C8R 8 páginas. Optional rear camera kit
Imprimir página1. When I put the car in Reverse, the radio screen blanks out. I do not have a rear view camera.
The Lockpick C8R automatically activates a rear view camera input for your radio. If you do not intend to
install a rear view camera or do not want it activated automatically, activate the Lockpick menus and
scroll down to set the AutoRear function to OFF.
2. My system does not show the factory DVD player picture at any time. Will the Lockpick work for this car?
The Lockpick will enable the video function regardless of whether it is currently activated.
3. I do not have navigation but I do have the large screen in my vehicle. Will the Lockpick turn on navigation
functions?
No, these radios do not have the hardware to receive GPS or the mapping software necessary.
4. I turned on the rear camera or and all I see is a flashing picture or blank screen when I try to look at the
video.
Insure that your aftermarket camera is powered by the Lockpick and plugged into the Lockpick Video
input on the optional C8RCAMKIT harness. Also, check to see that Lockpick and radio connectors are
plugged to the back of the radio.
5. I pressed the up and down buttons on the front of my steering wheel and the Lockpick menus are not
changing.
After the BACK button is pressed 4x to enter the Lockpick menu structure, the three buttons on the back
side of steering wheel, on the left side, are used to go up, down and select Lockpick functions. Consult the
included steering wheel control operation page for full details.
6. How do I turn off a camera that I have turned on manually?
Press the middle button on the back of the steering wheel on the left side (see steering wheel illustration).
(make sure module is also connected to Lockpick harness and vehicle)
Your Lockpick C8R interface includes the ability to be updated via a USB connection to a PC.
Connect a common mini USB to standard USB cable (the same as used with most cameras and phones) into
the jack on the Lockpick module and then into a laptop computer. A software program is available for
download and installation on our website at
application and save it to your computer. Open the folder and select the SETUP file to install the
FIRMWARE UPDATER program on your computer. On our website we provide updates and changes that
will use the FIRMWARE UPDATER program to allow simple updates to your Lockpick module when
desired.
Installation Q & A:
USB UPDATING
www.coastaletech.com/usbupdate.htm
Download the