Acer AC713 Manual del usuario - Página 3
Navegue en línea o descargue pdf Manual del usuario para Monitor Acer AC713. Acer AC713 13 páginas. Acer ac713: user guide
Imprimir página
- 1. Table of Contents
- 2. Packing List
- 3. Precautions
- 4. Installation Instructions
- 4. Swivel Base
- 4. Power Cord
- 4. Video Cable
- 5. Operating Instructions
- 5. General Instructions
- 5. Front Panel Control
- 5. How to Adjust a Setting
- 5. Adjusting the Picture
- 6. Plug and Play
- 7. Technical Support (FAQ)
- 8. Appendix A - Specifications
- 9. Appendix B - Factory Preset Timing Table
INSTALLATION INSTRUCTIONS
Swivel Base
To attach the swivel base to the monitor, do the following:
• Carefully turn the monitor on its side or upside down. ( see figure 1 )
• Locate the cavities at the bottom front of the monitor.
• Insert the pegs on the swivel base into these cavities. Push the swivel base
forward until the swivel base locks in place.
• To remove the swivel base, hold the bottom of the swivel base, then push
it out.
Figure 1
Power Cord
Power Source:
1. Make sure the power cord is the correct type that required in your area.
2. This monitor has a universal power supply that allows operation in either
100/120V AC or 220/240V AC voltage area ( No user adjustment is
required. )
3. Connect the power cord into your monitor's power input socket, and then
plug the other end into a 3-pin AC power outlet. The power cord may
be connected to either a wall power outlet or the power outlet socket on
your PC, depending on the type of power cord supplied with your
monitor.
41A749-786-1A 英文
Install
Remove
Installing and Removing the Swivel Base
3