Canon 3433B010 Manual de instalación - Página 2
Navegue en línea o descargue pdf Manual de instalación para Impresora Canon 3433B010. Canon 3433B010 16 páginas. Large-format printers
También para Canon 3433B010: Manual básico (40 páginas)
Imprimir página
Preparations
1
Install the printer. You can use the
following two methods for installing the
printer.
• Install with a stand
Assemble the stand and install the
printer referring to the Printer Stand
Setup Guide included with the stand.
After installation, proceed to step 4.
• Install without a stand on a table
Proceed to step 2.
3
Three people should hold the printer's carrying handles and place the printer on a table or
other fl at location.
•
The iPF750/iPF755 weighs approximately
52 kg and the iPF650/iPF655 approximately
Caution
43 kg by themselves. Moving the printer
requires at least three people. Be careful
to avoid back strain and other injuries.
5
Move the printer to the location where you
will use it.
•
When moving the stand, lift the support rod
to the position (a) before closing the output
Caution
stacker and unlocking the 4 casters. Failure
to do so may lead to scratched fl ooring,
damage to the basket cloth, and injury.
O F F
Prepare the printer for use by installing the printer and connecting the power cord.
•
Stands may be standard or optional
depending upon your model and location.
MEMO
iPF750/iPF755: Standard
iPF650/iPF655: Optional (equipped as
standard in some locations)
•
When moving the printer, fi rmly grasp the
carrying handles. Holding the printer at
other positions is dangerous, and may
cause injury and damage if the printer is
dropped.
•
After you have moved the stand, be sure to
lock the 4 casters.
a
O N
2
4
6
2
Remove the packing materials from the
top of the printer.
Remove the orange tape used to secure
the roll holder to the printer.
Plug the power cord into the power supply
connector on the right of the printer and
plug the other end into the outlet.