Acer AL1716 Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Monitor Acer AL1716. Acer AL1716 20 páginas. 43.2cm(17”) tft color lcd monitor
También para Acer AL1716: Manual del usuario (17 páginas), Manual del usuario (10 páginas), Manual de servicio (50 páginas), Manual de servicio (50 páginas), Especificaciones (2 páginas), Manual de servicio (47 páginas), Manual de servicio (40 páginas), Manual de inicio rápido (1 páginas), Manual del usuario (11 páginas), Manual de inicio rápido (1 páginas)

INSTALLATION INSTRUCTIONS

SWIVEL BASE （only for AL1716）

Install

Figure 1

Support Frame (only AL1716 h/AL1716 r)

Do not perform a pulling or plugging action when the display is under

slanting status to prevent the display from ejecting.

Pull out the pin from the display support frame as per the figure and then

adjust the height. Note that upon pulling out the pin, erect the machine on the

table to prevent the top part of the display from ejecting.

POWERCORD

Power Source:

1. Make sure that the power cord is the correct type required in your area.

2. This LCD monitor has an External universal power supply that allows

operation in either 100/120V AC or 220/240V AC voltage area (No user

adjustment is required.)

3. Connect the AC-power cord into your LCD monitor's AC-power-input. The

AC-power cord may be connected to either a wall power outlet or the

power outlet socket on your PC, depending on the type of power cord

supplied with your LCD monitor.

NOTES

A certified power supply cord has to be used with this equipment. The relevant

national installation and/or equipment regulations shall be considered. A

certified power supply cord not lighter than ordinary polyvinyl chloride flexible

cord according to IEC 60227 (designation H05VV-F 3G 0.75mm

H05VVH2-F2 3G 0.75mm

synthetic rubber according to IEC 60245 (designation H05RR-F 3G 0.75mm

shall be used.

Remove

Installing and Removing the Swivel Base

) shall be used. Alternative a flexible cord be of

)