Canon 900D - i Color Inkjet Printer Manual de inicio rápido - Página 8
Navegue en línea o descargue pdf Manual de inicio rápido para Impresora Canon 900D - i Color Inkjet Printer. Canon 900D - i Color Inkjet Printer 29 páginas. Bubble jet printer direct printing guide
También para Canon 900D - i Color Inkjet Printer: Instrucciones de instalación (2 páginas), Manual de impresión (4 páginas), Manual de impresión (50 páginas), Manual de impresión (30 páginas), Manual de impresión (48 páginas)
Imprimir página
Installing the Ink Tanks
• For safety reasons, store ink tanks out of the reach of small children.
• Do not drop or shake ink tanks as this may cause the ink to leak out and stain your clothes and hands.
protective cap
6
1 1 1 1
Take out the Magenta ink tank.
2 2 2 2
Pull the orange tape in the direction of
the arrow and remove the clear film.
3 3 3 3
Hold the ink tank as shown in the
diagram and remove the protective cap.
• Do not squeeze the sides of
the ink tanks as this may
cause the ink to leak out and
stain your clothes and hands.
• Do not touch the ink port.
• Do not attempt to reattach the
protective cap once it has
been removed.
4 4 4 4
Insert the Magenta ink tank into the
right-hand slot. Press the top until it
clicks into place.
5 5 5 5
Use the same procedure to install the
other ink tanks in their appropriate slots.
Check the labels to make sure that each tank is in the
correct position.
• Only install the ink tanks in the positions specified
by the labels.
• If ink tanks are not installed in the right position,
colors will not be printed correctly. Immediately
reinstall the tank in the correct position and carry
out print head cleaning. For details, refer to the
User's Guide.
6 6 6 6
Close the front cover.
Wait until the POWER lamp remains fully lit (about 70
seconds).
ink port