Aktakom ATE-9030 Manual del usuario - Página 6
Navegue en línea o descargue pdf Manual del usuario para Instrumentos de medida Aktakom ATE-9030. Aktakom ATE-9030 9 páginas. Sound level meter
Imprimir página
EXCEL graphic screen ( for example )
7. ADVANCED SETTING
Under do not execute the Datalogger function, press the «SET Button» (3-7, Fig. 1) continuously at least two
seconds will enter the «Advanced Setting» mode. Then press the «Next Button» (3-3, Fig. 1) once a while in sequence
to select the six main function, the lower display will show:
dAtE......Set clock time ( Year/Month/Date, Hour/Minute/Second)
dEC.......Set SD card Decimal character
PoFF..... Auto power OFF management
bEEP.....Set beeper sound ON/OFF
SP-t...... Set sampling time
Sd-F..... SD memory card Format
Remark: During execute the « Advanced Setting "function, if press «ESC Button» ( 3-2, Fig. 1) once will exit the
«Advanced Setting» function, the LCD will return to normal screen.
7-1 Set clock time (Year/Month/Date, Hour/Minute/Second)
When the lower display show «dAtE»
1) Press the «Enter Button» (3-4, Fig. 1) once, Use the «▲ Button» (3-5, Fig. 1) or «▼ Button» (3-6, Fig. 1) to adjust
the value ( Setting start from Year value ). After the desired value is set, press the «Enter Button» (3-4, Fig. 1) once
will going to next value adjustment ( for example, first setting value is Year then next to adjust Month, Date, Hour,
Minute, Second value).
2) After set all the time value (Year, Month, Date, Hour, Minute, Second ), the screen will jump to «SD card Decimal
character» setting screen.
Remark: After the time value is setting, the internal clock will run precisely even Power is off (The battery is under
normal condition, no low battery condition).
7-2 Decimal point of SD card setting
The numerical data structure of SD card is default used the «.» as the decimal, for example «20.6» «1000.53». But
in certain countries (Europe ...) is used the «,» as the decimal point, for example «20,6» «1000,53». Under such
situation, it should change the Decimal character at first.
When the lower display show «dEC»
1) Use the «▲ Button» (3-5, Fig. 1) or «▲ Button» (3-6, Fig. 1) to select the upper value to «bASIC» or «Euro».
bASIC – Use «.» as the Decimal point with default. Euro – Use «,» as the Decimal point with default.
2) After select the upper text to «bASIC» or «Euro», press the «Enter Button» (3-4, Fig. 1) will save the setting
function with default.
7-3 Auto power OFF management
When the lower display show «PoFF»
1) Use the «▲ Button» (3-5, Fig. 1) or «▼ Button» (3-6, Fig. 1) to select the upper value to «yES» or «no». yES
–Auto Power Off management will enable. no – Auto Power Off management will disable.
2) After select the upper text to «yES» or «no», press the «Enter Button» (3-4, Fig. 1) will save the setting function
with default.
7-4 Set beeper sound ON/OFF
When the lower display show «bEEP»
1) Use the «▲ Button» (3-5, Fig. 1) or «▼ Button» (3-6, Fig. 1) to select the upper value to «yES» or «no». yES
– Meter's beep sound will be ON with default. no – Meter's beep sound will be OFF with default.
2) After select the upper text to «yES» or «no», press the «Enter Button» (3-4, Fig. 1) will save the setting function
with default.
Remark: After execute the datalogger function, the buzzer sound will off automatically to prevent any interference
of the measurement.
7-5 Set sampling time (seconds)
When the lower display show «SP-t»
1) Use the «▲ Button» (3-5, Fig. 1) or «▼ Button» (3-6, Fig. 1) to adjust the value (0, 1, 2, 5, 10, 30, 60, 120, 300,
600, 1800, 3600 seconds).
Remark: If select the sampling time to «0 second», it is ready for manual Datalogger.
2) After the Sampling value is selected, press the «Enter Button» (3-4, Fig. 1) will save the setting function with
default.
7-6 SD memory card Format
When the lower display show «Sd F»
1) Use the «▲ Button» (3-5, Fig. 1) or «▼ Button» (3-6, Fig. 1) to select the upper value to «yES» or «no». yES
– Intend to format the SD memory card, no – Not execute the SD memory card format.
6
www.tmatlantic.com