Acer AL1751W Manual del usuario - Página 2

Navegue en línea o descargue pdf Manual del usuario para Monitor Acer AL1751W. Acer AL1751W 8 páginas. Acer al1751: user guide

Important Safety Instructions

Please read the following instructions carefully. This manual should be retained for future use.

1. To clean LCD Monitor screen;

-- Power off LCD Monitor and unplug the AC Cord.

-- Spray a non-solvent cleaning solution onto a rag.

-- Gently clean the screen with dampened rag.

2. Do not place the LCD Monitor near a window. Exposing the monitor to rain water, moisture or sunlight can

severely damage it.

3. Do not apply pressure to the LCD screen. Excess pressure may cause permanent damage to the display.

4. Do not remove the cover or attempt to service this unit by yourself. Servicing of any nature should be

performed by an authorized technician.

5. Store LCD Monitor in a room with a room temperature of 5° ~ 40°C (or 41° ~ 104°F). Storing the LCD

Monitor outside this range could result in permanent damage.

6. If any of the following occurs, immediately unplug your monitor and call an authorized technician.

* Monitor to PC signal cable is frayed or damaged.

* Liquid spilled into LCD Monitor or the monitor has been exposed to rain.

* LCD Monitor or the case is damaged.

7. For use only with AC adapter, Li-shin LSE9901B1260 or LAE LAD6019AB5.

Chapter 1 Installation

Before unpacking the LCD Monitor, prepare a suitable workspace for your Monitor and computer. You need a

stable and clean surface near a wall power outlet. Make sure that LCD Monitor has enough space around it for

sufficient airflow. Though the LCD Monitor uses very little power, some ventilation is needed to ensure that the

Monitor does not become too hot.

After you unpack the LCD Monitor, make sure that the following items were included in the box:

▪ Main body

▪ Power supply

▪ 1.8M VGA cable

If you find that any of these items is missing or appears damaged, contact your dealer immediately.

When you open the box to take the product out then pull down

the base first (See figure 1-1)

The LCD Monitor is designed to allow users to have a

comfortable viewing angle. The viewing angle can be adjusted

from -5°to +25°.(See fig. 1-2)

When you want to close the base and body to 90°, you need to

release a button from 25°. (See fig. 1-3)

Warning: Do not force the LCD Monitor over its maximum viewing angle settings as stated above. Attempting

this will result in damaging the Monitor and Monitor stand.

▪ 1.8M Audio cable

▪ User manual

Figure 1-1

Figure 1-2

Figure 1-3