Aktakom ASE-4509 Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Pistola de soldar Aktakom ASE-4509. Aktakom ASE-4509 8 páginas. Smd rework station

3. Precautions

• Attaching the Nozzle

Do not press the Nozzle or pull on the edge of the

Nozzle by pliers. Also, do not retighten the screw too

tightly

• Thermal Protector

Power will automatically be off when the unit exceeds

a certain temperature. Once the temperature has

dropped to a safety level, power will automatically

turn on.

Caution - High Temperature Operation

Do not use the SMD unit near ignitable gases, paper,

or other inflammable materials.

The nozzle air is extremely hot and can cause painful

burns. Never touch the heater pipe or allow the

heated air to blow against your skin.

Do not disassemble the Product.

Disconnect the plug when you don't use the unit for a

long time.

When the power cord is connected into the power

supply, the unit has a little flow of electricity, even the

Power Switch is in off position. So then you don't use

the unit for a long time, disconnect the plug.