Acer AL2423W r Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Monitor Acer AL2423W r. Acer AL2423W r 12 páginas. 24-inch flat panel active-matrix tft lcd

Connecting the devices

Caution: Make sure that the computer and the monitor are both disconnected from the power

supply.

Power cord

Attach the monitor to the power cord, and then insert the power cord into a

properly grounded electrical socket.

VGA cable

Connect the signal cable to the VGA input socket of the monitor, and connect the

signal cable to the VGA output socket of the graphics card on the computer. Then

tighten the thumbscrews on the connector.

DVI-D cable

Connect the signal cable to the DVI-D input socket of the monitor, and connect the

signal cable to the DVI-D output socket of the graphics card on the computer. Then

tighten the thumbscrews on the connector.

Audio cable

Connect the audio input socket (AUDIO IN) of the LCD monitor and the computer

by means of the audio cable.

Power switch

On / off

WARNING!

Check the VGA card of your computer. Make sure the shape of the plug matches the shape of

the socket it is inserted into. Also check that none of the pins are bent or otherwise damaged.

First, switch on the hard-switch on the backside of monitor, then turn on PC and power button on

monitor's control panel. When you see the LED on the power button go green, this indicates the computer

is ready for use. Allow about 10 seconds for the video signal to appear. If you do not see the green light

VGA

DVI-D